Tower Climbing
Inspection Services
Great Plains Towers can provide trained
inspectors for an annual physical inspection of each
tower site. Over the past 50 years we have earned a
reputation for quality, reliability and attention to
detail.
|
 |
- During a
typical tower inspection, we inspect, photograph and
report on the following as a partial list.
- The condition
of beacon lamps, strobe flash tubes and other lamps,
replacing lamps to ensure continued compliance with
FAA guidelines.
- The physical
condition of the tower, guy wires, antennas, feed
lines, safety climb cable assembly and other
components.
- Cracks which
may have formed in the foundation supporting the
tower, sealing them as needed or requested.
- The
above-ground condition of all Cathodic Anchor Shaft Protections,
applying a layer of tar from top to bottom for added
protection.
- The tension of
guy wires, adjusting turnbuckles as needed or
requested.
- The voltage
levels of the anodes connected to each Cathodic Anchor Shaft Protection
to ensure corrosion-safe voltage levels.
- The condition
of all bolts, nuts and welds, securing any loose
bolts and nuts as we go and checking for faulty
welds along the tower.
- Damage to the
fence surrounding the tower and anchors, repairing
it as needed or requested.
|
Great Plains Towers
Sample Climbing Inspection Report
DOWNLOAD
.JPG)