Great Plains Tower Products Logo
(701)282-2236
sales@greatplainstowers.com

Products

Search

  • All Categories
  • Structures
  • Ballasts
  • Components
Safety Climb Fall Arrest Systems

Safety Climb Fall Arrest Systems

All Safety Climb Systems include Upper Cable Support Bracket, Plastic Cap, Cable Cushion, Cable Strand Vise, Cable Stand-offs, Lower Cable Support Bracket, Tension Rod, and 3/8" Extra High Strength (EHS) Galvanized Cable Strand cut to match tower height.

When purchased with a new tower, top and bottom brackets are built into top and bottom sections of the tower.

We recommend a Safety Climb System be installed on every tower to provide an easy and safe means to climb the tower.

Top Pipes for Towers or Poles

Top Pipes for Towers or Poles

Our Top Pipes are made out of high strength steel to ensure they are strong enough to support any antenna mounted to them. Pipes are hot dipped galvanized to provide long lasting corrosion protection from the elements.

Our Stock sizes are 3/4 inch pipe (1 inch Outside Diameter), 2 inch pipe (2.375 inch Outside Diameter), 2-1/2 inch pipe (2.875 inch Outside Diameter), and 3-1/2 inch pipe (4 inch Outside Diameter). Standard stock size for the length of the pipe is 4 feet. We can make any diameter or length of pipe to meet your individual needs upon request.

All Top Pipes come with a flange and lightning rod tab welded on.

Anti-Climb Panels

Anti-Climb Panels

These Anti-Climb panels ensure that unauthorized personnel cannot climb your tower. Each Anti-Climb panel is designed for installation on your particular tower section which comes complete with three aluminum panels riveted onto the tower section at our facility.

All of our towers can have Anti-Climb Panels installed as an option.

Anti-Climb Hinged Door

Anti-Climb Hinged Door

Our Anti-Climb Hinge Door is an angle iron frame galvanized with an aluminum sheet on hinges.

The door can be locked to allow only authorized personnel to climb the Tower. Door includes cut outs for Safety Climb Fall Arrest System.

Antenna Standoff Bracket Mounts

Antenna Standoff Bracket Mounts

Our Antenna Standoff Bracket Mounts are fully welded with no assembly required which facilitates fast installations. Hardware for mounting the bracket to the tower is included. Antenna Standoff Bracket Mounts are hot dipped galvanized to provide long lasting corrosion protection from the elements.

Stock sizes are 2 feet, 3 feet, and 4 feet with a 2 inch (2.375 inch outside diameter) x 2.5 foot long pipe. We can build Antenna Standoff Bracket Mounts to meet customer specifications.

Anchor Base Bolt Cluster

Anchor Base Bolt Cluster

Our Anchor Base Bolt Clusters are designed to be installed in a foundation to mount our products. Anchor Base Bolt Clusters are built to match the flanges on our Mid-Hinge Fold Over Lattice Tower, Mid-Hinge Fold Over Pole, Base-Hinge Fold Over Pole, and Caisson Anchor Heads.

All Anchor Base Bolt Clusters ship fully welded and ready to install in foundations to allow rapid and easy installation.

Tower Base Ground Rod Kits

Tower Base Ground Rod Kits

Ensure that your tower is grounded to a minimum of national standards or Motorola grounding standards with our Tower Base Ground Rod Kits. Our Base Grounding Kits meet ANSI/TIA-222 REV H Standards.

Each Kit includes 1 copper clad steel ground rod, 10 feet of #2 gauged tinned solid copper wire, 1 type-G round rod clamp, and one mechanical wire connection lug for structure end.

Lightning Rod

Lightning Rod

These lightning rods with their pointed tips may be the lightning strikes preferred path to ground down and through the tower instead of the lightning striking valuable equipment clamped on a structure.

Stock sizes are 1/2 inch x 12 inches aluminum, 5/8 inch x 4 feet copper clad steel, and 3/4 inch x 4 feet copper clad steel.

Face Mounted Antenna Brackets

Face Mounted Antenna Brackets

These Face Mounted Antenna Brackets mount onto and across the entire tower face which prevents antenna mounting brackets from otherwise rotating on a single tower leg clamp.

Face Mounted Antenna Brackets are custom built to meet each customers needs.

Cable Access Porthole

Cable Access Porthole

Reinforced 2 inch x 6 inch tube-hand & cable access porthole with cover is an option to add to our Mid-Hinged and Base-Hinged Fold Over Poles. Can be added at any height on our poles.

Guy Anchor Shafts

Guy Anchor Shafts

Basic Anchor design used in variety of different site conditions. Installation is simple. Install the base of an anchor shaft in a suitable buried concrete foundation to support the combined tensions of multiple stranded guy wires which in turn supports a guy wire type tower.

All Guy Anchor Shafts are built from 50 ksi minimum yield strength steel and are hot dipped galvanized to provide long lasting corrosion protection from the elements.

We can fabricate our Guy Anchor Shafts to meet your tower site needs.

Caisson Guy Anchors

Caisson Guy Anchors

Our Caisson Guy Anchors are fully welded and hot dipped galvanized to provide long lasting corrosion protection from the elements. An Anchor Base Bolt Cluster is included with each Caisson Guy Anchor.

The some benefits of a Caisson anchor are as follows:

1. Since all of the steel is covered in concrete no Cathodic Protection System is required.

2. Faster install speed since no back filling is needed when compared to traditional guy anchor rod shafts.

3. No need to dig up anchors and inspect for corrosion due to everything being in a solid block of concrete.

Anchor Shaft Corrosion Cathodic Protection Systems

Anchor Shaft Corrosion Cathodic Protection Systems

Installing our high quality Cathodic Protection System (CPS) ensures the safety, security & life expectancy to your guy wire tower structures. Our cathodic protection systems have proven they can last over 30 years when used in conjunction with a resilient anchor shaft protective coating.

Each kit includes anodes, stainless steel beam clamps, and one-hole ground lugs.